Plastic Repair Putty

Level irregularities on different plastic surfaces, with exception of polyethyleen (PE) and polypropyleen (PP) of your car with MOTIP 2-component Plastic Repair Putty. Also suitable for surfaces of steel, aluminium, wood, concrete and polyester, which are subject to vibrations. Plastic repair putty is very elastic and easy to sand. Plastic repair putty can be resprayed with all paints, also powder coating, and has a very fine structure. Plastic repair putty is resistant to chemicals and the weather and has excellent adhesion. MOTIP Plastic Repair Putty can be applied in layers with a thickness up to 1 centimetre.

  • grey
  • mat
  • 420 G

Where to buy

Characteristics

  • Easy to sand
  • Very elastic
  • Re-sprayable with all lacquer systems, also powder coating
  • Very fine structure
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Mix the required amount of putty with the harder. Apply in the desired layer thickness.

After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature.

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

Colours

grey

420 G
Mat
Art. nr. 000059
EAN 8711347126002

* colours may differ from the preview above.