Glass Fibre Putty Filled

Fill deeper damage like holes in surfaces of steel, aluminium, wood, concrete and polyester with MOTIP 2-component Glass Fibre Putty (filled). Glass Fibre putty is easy to sand and has excellent filling properties. Glass Fibre putty offers high impact resistance and may be resprayed with all paints. It is resistant to chemicals and the weather and can be applied in layers up to 2 cm in thickness.

  • grey
  • flat mat
  • 2 volumes
    • 1,00 KG
    • 250 G

Where to buy

Characteristics

  • Easy to sand
  • Excellent filling properties
  • High impact resistance
  • Re-sprayable with all lacquer systems
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface

Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

Colours

grey

250 G
Flat mat
Art. nr. 000053
EAN 8711347000531

grey

1,00 KG
Flat mat
Art. nr. 000070
EAN 8711347000708

* colours may differ from the preview above.