Finishing Putty

level small, superficial irregularities in surfaces of steel, aluminium, wood and polyester on your car with fast drying MOTIP Finishing Putty. Finishing putty has a fine structure and is easy to sand. MOTIP Finishing putty is re-sprayable with all lacquer systems and can be applied in layers up to 0.5 mm.

Where to buy

Characteristics

  • Easy to sand
  • Fast drying
  • Re-sprayable with all lacquer systems
  • Very fine structure
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Apply the finishing putty in the desired layer thickness with an applicator.

The drying time depends on the ambient temperature.

After use, directly clean the tools used.

Colours

grey

200 G
#808080
EAN 8711347128143

grey

200 G
#808080
EAN 8711347000579

* colours may differ from the preview above.