Heat Resistant Paint

Paint surfaces that are exposed to very high temperatures, such as the exhaust of your car, with MOTIP Heat Resistant Paint. Heat Resistant Paint is resistant to petrol, chemicals and weather influences.

Where to buy

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Do not apply any primer.

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the heat resistant lacquer in several thin layers. Before applying the next layer, again shake the aerosol. Allow to dry at room temperature for one hour. Then, heat for 30 to 60 minutes (200°C) in order to harden the paint layer. Smoke develops during the lacquer hardening process.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

Dark anthracite

400 ML
#293133
EAN 8711347040308

black

400 ML
#000000
EAN 8711347040315

brown

400 ML
#85370b
EAN 8711347180912

white

400 ML
#ffffff
EAN 8711347040360

anthracite

400 ML
#555965
EAN 8711347040377

beige

400 ML
#e3d9c6
EAN 8711347040384

grey

400 ML
#808080
EAN 8711347040391

* colours may differ from the preview above.