Hammerfinish Paint

Fast-drying paint with hammered effect for treated and untreated surfaces including wood, metal, aluminium, glass and plastic. MOTIP Hammerfinish Paint offers good coverage, is shock proof and is resistant to scratches, petrol, chemicals, thinned cleaners and weather influences.

Where to buy

Characteristics

  • Fast drying
  • Good coverage
  • Scratch free and shock proof
  • Resistant to petrol, chemicals, thinned cleaners and weather influences

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of MOTIP primer suitable for the surface. After drying, sand the base layer (grain 600).

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply a thin first layer and after several minutes apply a finishing coat. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

blue

400 ML
#83b7c4
EAN 8711347040117

green

400 ML
#2b9878
EAN 8711347040124

silver

400 ML
#C0C0C0
EAN 8711347040131

grey

400 ML
#808080
EAN 8711347040148

gold

400 ML
#d77b1a
EAN 8711347040155

anthracite

400 ML
#293133
EAN 8711347040179

* colours may differ from the preview above.