Fluorescent Paint

Decorative, fluorescent acrylic paint for treated and untreated surfaces including wood, metal, aluminium, stone and various types of plastic. For best results, first apply a base layer of MOTIP White Primer.

Where to buy

Characteristics

  • Fast drying
  • Fluorescent
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. In order to achieve the best fluorescent effect, apply a layer of white MOTIP primer. When treating surfaces of plastic, first apply a layer of plastic primer before applying the MOTIP white primer. After drying, sand the base layer (grain 600).

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated 10 to 12 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Recommendation: In order to improve the resistance to UV and weather influences, apply a finishing coat of MOTIP acrylic clear varnish.

Colours

red

400 ML
#fd4602
EAN 8711347040209

pink

400 ML
#fe017e
EAN 8711347040216

yellow

400 ML
#fafd00
EAN 8711347040223

green

400 ML
#00fe00
EAN 8711347040230

blue

400 ML
#02a7ff
EAN 8711347040247

* colours may differ from the preview above.