Brake Caliper Paint

Paint your brake calipers in a new colour with MOTIP Brake Caliper Paint. Use the paint to highlight brake pads in the colours yellow, red, blue and silver. The paint has good filling properties and a lasting gloss. The paint is scratch free, shock proof and resistant to petrol, chemicals and the weather, and is rust and dirt preventive.

Where to buy

Characteristics

  • Good filling property
  • Resistant to petrol, chemicals and weather influences
  • Lasting gloss
  • Scratch free and shock proof
  • Corrosion preventive
  • Dirt preventive
  • Non-fading (UV-resistant)
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: De surface should be clean, dry and free of fat. Remove loose old lacquer and rust and then sand. Apply a layer of MOTIP primer. After drying, sand the base layer (grain 600).

The surface should be clean, dry and free of fat. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample.

Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

silver

400 ML
#C0C0C0
EAN 8711347194940

yellow

400 ML
#fff12b
EAN 8711347040971

red

400 ML
#fc2b2e
EAN 8711347040988

blue

400 ML
#2a38fa
EAN 8711347058617

* colours may differ from the preview above.