Bumper Repair Putty

Level irregularities on the bumper of your car with MOTIP 2-component Bumper Repair Putty. Bumper repair putty is very elastic and easy to sand. Bumper repair putty can be resprayed with all paints, also powder coating, and has a very fine structure. Bumper repair putty is resistant to chemicals and the weather and has excellent adhesion. MOTIP Bumper Repair Putty can be applied in layers with a thickness up to 1 centimetre.

  • dark grey
  • mat
  • 2 volumes
    • 1,00 KG
    • 250 G

Where to buy


  • Easy to sand
  • Very elastic
  • Re-sprayable with all lacquer systems, also powder coating
  • Very fine structure
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature.

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.


dark grey

250 G
Art. nr. 000080
EAN 8711347203048

dark grey

1,00 KG
Art. nr. 000081
EAN 8711347203055

* colours may differ from the preview above.