Spray Putty

Fill irregularities in treated and untreated surfaces of wood, metal and aluminium with MOTIP Spray Putty. Spray Putty is fast-drying and excellent filling properties and coverage. The spray has excellent adhesion and prevents rust. MOTIP Spray Putty is easy to sand, both wet and dry (from grain 400).

Where to buy

Characteristics

  • Excellent filling property and coverage
  • Easy to sand, both wet and dry (from grain 400)
  • Fast drying
  • Corrosion preventive
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the spray putty in several thin layers. Before applying the next layer, again shake the aerosol. After hardening sand, either wet or dry (grain 400). Before applying a finishing coat, apply a primer.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

beige grey

400 ML
#b2b39b
EAN 8711347040629

* colours may differ from the preview above.