Sanding Key Aid

Use MOTIP Sanding Key Aid as a fast-drying control layer when sanding primers and fillers on your car. Apply the Sanding Key Aid in a thin layer and let it dry. After sanding the marked surface, irregularities such as scratches and small holes (pinholes) remain black. These can then be easily removed with a suitable MOTIP filler.

  • black
  • mat
  • 500 ML

Where to buy

Characteristics

  • Fast drying
  • User-friendly

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease.

The aerosol should have room temperature. Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample.

Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply a thin layer of sanding aid and allow to dry.

Sand the surface till the control lacquer is completely removed.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

black

500 ML
Mat
Art. nr. 04057
EAN 8711347066582

* colours may differ from the preview above.