Stone Chip Spray 1 l (Medium Solid)

Protect the bottom and visible bodywork parts of your car against stone chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound-absorbing and remains flexible.

Where to buy

Characteristics

  • To be applied with an UBC Spray-gun
  • Re-sprayable with all lacquer systems
  • Remains flexible
  • Very good adhesion
  • Excellent corrosion prevention
  • Sound-absorbing
  • Resistant to weather influences
  • Resistant to weak acids and bases

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Remove loose old lacquer and rust and sand the surface.

The surface should be clean, dry and free of grease. The can should have room temperature. Best processing temperature 15 to 25°C.

Before use, shake the can. Working pressure 4 to 5 bar.

Apply the Stone Chip Spray in the desired layer thickness. After drying, without sanding, re-sprayable with all lacquer systems.

After use, clean the spray-gun with white spirit

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

black

1,00 L
#000000
EAN 8711347000111

grey

1,00 L
#a5a5a5
EAN 8711347000128

white

1,00 L
#ffffff
EAN 8711347000135

* colours may differ from the preview above.