Zinc Primer
MOTIP Zinc Primer offers protection against corrosion for all iron metals, such as car bodies, exhaust systems, gates, machines, metal housings, metal fittings and fences. Especially suitable for the protection of welding seams and metals which are exposed to corrosion. Cathodic rust-protection on a very high technical level, which is very easy and quick to apply.
- grey
- flat mat
- 400 ML
Karakteristike
- Very easy and quick to apply cathodic corrosion protection for blank metals
- High-grade zinc coating with more than 90 % zinc share in the dry film
- Resistant to highest demands against corrosion
- Ideal for all metals in outside places, which are liable to rust
- Highheat-resistant up to 600°C
- Particularly suitable for welding seams
- Good flow
- Coatable
Upute za korištenje
The metal surface has to be blank and free from fat.
Due to the high density, the Zinc Primer has to be shaked for at least 2 minutes after you hear the noise of the mixing-balls. Otherwise the valve could block.
Shake the can vigorously for approx. 2 - 3 minutes.
Test spray at an invisible spot.
Apply several covering coats.
Spray from a distance of approx. 25 - 30 cm.
After drying (approx. 24 hours) apply primer and top coat.
Do apply just thin coats to objects, which are exposed to high heat. If necessary, re-coat with temperature-resistant lacquer (test painting).
Overpainting with other paints is not recommend
Boje
grey
400 ML
Flat mat
Umjetnost. br. 880105
EAN 8711347276219
boje se mogu razlikovati od gornjeg pregleda.