Carat Gold and Carat Silver

MoTip Carat is a high quality decorative acrylic lacquer, with the properties of a car refinishing lacquer. However, with the advantage that the application is so user friendly that now everyone can benefit from the advantages of a spray can. The Carat assortment consists of primers, plastic primer, several trendy lacquers, some effect lacquers (chrome and sparkle) and a special primer for styropor.

Caractéristiques

  • Excellent coverage
  • Lasting colour and gloss
  • Scratch free and wear-resistant
  • Excellent vertical stability so hardly any dripping
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Mode d'emploi

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust, sand the surface and apply a layer of Carat primer. When treating surfaces of plastic, first apply a layer of Carat plastic primer before applying the Carat primer. After drying, sand the base layer (grain 600).

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).