Effect Stain Sealer

Fast drying primer on basis of acrylic resin, with excellent isolating properties for interior use. To cut off stains on mineral surfaces (plaster) and in surfaces of wood and concrete. Re-sprayable with all emulsion lacquers, alkyd and waterbased acrylic lacquers. Deco Effect Stain Sealer has excellent adhesion and is non-yellowing.

  • 0.2221

Where to buy

Characteristics

  • Fast drying
  • Excellent adhesion
  • Non yellowing

Usage instructions

The surface should be clean, dry and free of grease. When desired, slightly sand the surface, grain 600.

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

0.2221
EAN 8711347226948

* colours may differ from the preview above.