Effect Zinc

Fast drying zinc spray with good filling properties and excellent adhesion to treat galvanised and untreated steel. Zinc spray has outstanding cathodic corrosion prevention and is spot-weldable. Deco Effect Zinc Spray is resistant to petrol, chemicals and weather influences and is heat resistant to 350°C.


  • Excellent coverage
  • Fast drying
  • Heat resistant to 350°C.
  • corrosion prevention


The surface should be clean, dry and free of grease. Slightly sand the surface (grain 600).

The aerosol should have room temperature. Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.