Ir a
Guía de colores
Ver descargas
Cómo encontrar el código de color de la pintura de un coche
Deco Lacquer
The MoTip Deco Paint assortment is a high quality alkyd lacquer to embellish and repair all kind of objectsin and around the house. The MoTip Deco Paint assortment consists of primer, several RAL-lacquers and clear lacquer in aerosols of 400 ml and 150 ml and a brush can of 100 ml.
- 38 colores
-
4 tipos de brillo
- flat mat
- gloss
- high gloss
- semi mat
-
2 volúmenes
- 150 ML
- 400 ML
Características
- Excellent coverage and filling property
- Lasting colour and gloss
- Resistant to petrol, chemicals and weather influenc
- Corrosion preventive
- Excellent adhesion
Ficha(s) de seguridad
- SDS 01601 - MOTIP DECO SPRAY PAINT RAL 9005 NEGRO INTENSO MATE 400 ML ES-ES
- SDS 01628 - MOTIP DECO SPRAY PAINT RAL 3000 ROJO VIVO ALTO BRILLO 400 ML ES-ES
- SDS 01632 - MOTIP DECO SPRAY PAINT RAL 4003 VIOLETA ÉRICA ALTO BRILLO 400 ML ES-ES
- SDS 01633 - MOTIP DECO SPRAY PAINT RAL 6009 VERDE ABETO ALTO BRILLO 400 ML ES-ES
- SDS 01634 - MOTIP DECO SPRAY PAINT RAL 5010 AZUL GENCIANA ALTO BRILLO 400 ML ES-ES
- SDS 01641 - MOTIP DECO SPRAY PAINT RAL 5018 AZUL TURQUESA ALTO BRILLO 400 ML ES-ES
- SDS 01658 - MOTIP DECO SPRAY PAINT RAL 3000 ROJO VIVO BRILLO DE SEDA 400 ML ES-ES
- SDS 01659 - MOTIP DECO SPRAY PAINT RAL 9005 NEGRO INTENSO BRILLO DE SEDA 400 ML ES-ES
- SDS 20102 MOTIP ES-ES
Instrucciones de uso
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of MoTip primer suitable for the surface. After drying, sand the base layer (grain 600).
The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol. Even when the lacquer has hardened, do not treat with acrylic lacquer or nitro-cellulose lacquer.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.