Backlight Spray

Highlight the rear lights of your car with MOTIP Blacklight Spray. The transparent lacquer has a lasting gloss and is scratch-free and shock proof. The lacquer is resistant to petrol, chemicals and the weather.

Where to buy

Characteristics

  • Not suitable to treat surfaces of polycarbonate!
  • Lasting gloss
  • Scratch free and shock proof
  • Resistant to petrol, chemicals and weather influences
  • Good adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

The surface must be clean, dry and free of grease.

The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Spray the lacquer in several thin layers, till the desired result has been achieved. (Before applying the next layer, again shake the aerosol).

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

black

400 ML
#000000
EAN 8711347011728

red

400 ML
#a11015
EAN 8711347011735

* colours may differ from the preview above.

Related products