PTFE Dry

Loosen jammed parts with MOTIP PTFE Dry and make sure the windscreen wipers, safety belts, door locks, hinges, etc. run smoothly again. PTFE Dry is dry surface lubricant that removes oil and grease from metal and plastic parts. It has a very low friction factor preventing wear and sticking, offers excellent adhesion and is resistant to the weather. Suitable for parts that are subjected to light loads and low speed. It can be used as a release agent for moulds when the use of silicone is not required.

Where to buy

Characteristics

  • No residues of oil or grease (dry film)
  • Very low friction factor
  • Prevents wear and sticking
  • Suitable for parts which are liable to light load and low speed
  • Suitable as release agent for moulds, where the use of silicones is not desired
  • Excellent adhesion
  • Resistant to weather influences
  • Directed jetspray

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

The aerosol should have room temperature.

Best processing temperature 10 to 25°C.

Before use, shake the aerosol.

Apply PTFE dry in a thin layer. After evaporation of the solvent (approximately 1 minute) a protecting, dry PTFE film will remain.

Colours

transparent white

500 ML
Art. nr. 090201
EAN 8711347226245

transparent white

200 ML
Art. nr. 290201
EAN 8711347235971

* colours may differ from the preview above.