DPF Cleaner

Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.

Where to buy

Characteristics

  • Fast-acting
  • Free from solvents
  • Non-corrosive
  • Non-flammable

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

For professional use only

The aerosol should have room temperature

Best processing temperature 10 to 25°C.

Before use, shake the aerosol.

Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer.

Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds

Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.

Colours

no colour

400 ML
Art. nr. 090515
EAN 8711347228836

* colours may differ from the preview above.