Glass Fibre Putty Unfilled

Fill deeper damages like holes in surfaces of steel, aluminium, wood, concrete and polyester with MOTIP 2-component Glass Fibre Putty (unfilled). Glass Fibre putty has excellent filling properties. It offers high impact resistance and may be resprayed with all paints. It is resistant to chemicals and the weather and can be applied in layers up to 2 cm in thickness.

  • grey
  • mat
  • 2 volumes
    • 1,00 KG
    • 250 G

Where to buy

Characteristics

  • Can be sanded mechanically
  • Excellent filling properties
  • High impact resistance
  • Re-sprayable with all lacquer systems
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

The surface should be clean, dry and free of grease. Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sandable mechanically. When desired apply a fine putty.

The drying time depends on the ambient temperature.

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

Colours

grey

250 G
#808080
EAN 8711347000821

grey

1,00 KG
#808080
EAN 8711347000838

* colours may differ from the preview above.