Plastic Primer

MOTIP Plastic Primer to treat untreated surfaces of various types of plastic. MOTIP Plastic Primer offers excellent adhesion, does not require sanding and can be resprayed with all paints.

  • no colour
  • mat
  • 400 ML

Where to buy

Characteristics

  • Fast drying
  • Excellent adhesion
  • Re-sprayable with all lacquer systems
  • Not suitable for treatment of PE

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. When desired, slightly sand the surface, grain 600.

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the plastic primer in maximum two (2) thin layers. After drying, without sanding, re-sprayable with all lacquer systems.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

no colour

400 ML
Mat
Art. nr. 04063
EAN 8711347040636

* colours may differ from the preview above.

Related products